Powersoft, has extended two of its fixed install ranges with the introduction of the two-channel Duecanali 6404 DSP+D and four-channel Quattrocanali 8804 DSP+D. Both amplifiers feature Dante digital audio networking architecture and onboard, signal processing, as well as being able to deliver 175V peak for applications where high SPL is required.
As with the other models in their respective ranges, the Duecanali 6404 DSP+D and Quattrocanali 8804 DSP+D platforms are able to deliver this high level of performance at a competitive price point and with the same low operational cost and carbon footprint as any other Powersoft product.
The new Duecanali 6404 DSP+D and Quattrocanali 8804 DSP+D series sits alongside Powersoft’s install dedicated amplifier platforms, addressing the requirement for small and large size applications, where the channel count is limited and the need for a flexible product to work with Hi-Z and Lo-Z systems is a must. The new models feature Powersoft’s switch-mode power supply with Power Factor Correction (PFC), Smart Rail Management (SRM) and bridgeable switch mode fixed frequency class-D output circuit topology.
The Duecanali 6404 DSP+D exploits Powersoft’s implementation of class-D amplification, while its fully integrated DSP yields extensive system management functionality. In addition to sound shaping and limiter functions, the DSP hardware and ArmoníaPlus software enable compliance with the crucial requirements of sound systems for emergency purposes.
The Duecanali range is able to drive low impedance loads (2/4/8Ω) and 70V/100V distributed lines selectable per channel delivering a maximum output power per channel of: 1.8kW at 8Ω; 3.2kW at 4Ω; 4.6kW at 2Ω; 9.2kW at 4Ω bridged; 6.4kW at 8Ω bridged; 4kW at 100V and 3.3kW 7V. Status feedback is presented via a front panel LED display or connected PC running ArmoníaPlus software.
In 1U rack space the Quattrocanali series is a smaller and lighter option, with a high-efficiency, microprocessor-controlled power supply with Power Factor Correction that allows worldwide operation with any mains voltage in the range 85-275V AC tolerant to peak up to 400V. The patented SRM (Smart Rails Management) technology maximises the of the system and significantly reduce power consumption at any load and usage condition.
With this release, the Duecanali, Quattrocanali,and Ottocanali Series of fixed installation solutions can address a full spectrum of applications, particularly where the channel count is limited and the need for a flexible product to work with Hi-Z and Lo-Z systems is given.
Both products can integrate within a networking environment through standard Cat5-cabled and Wi-Fi networks. Remote access via the Armonía Plus allows for full operability, including monitoring and diagnostics, from a decentralised location via laptop, PC, tablet or smartphone. The customisable interface represents all devices on a single screen, so that everything displayed can be monitored at a glance.
More: www.powersoft-audio.com
