Over nearly three decades, Dynacord’s PowerMate became popular in fixed installations, especially mosques, delivering mixing and amplification with effects. The PowerMate 3000-X is its latest evolution, an amplified digital mixing processor that combines a four-channel, 3kW DSP amplifier with a professional mixer in a compact 3U-high, 19-inch housing.
Designed as a problem solver for small to medium-sized venues, PowerMate 3000-X is easy to set up and operate, with options to fine-tune for installed sound systems that are also used for events and live performances. Typical installations range from houses of worship to music bars, and educational institutions to sports facilities. It also makes a compact centtrpiece for a smaller band’s live PA.
The PowerMate 3000-X is operated from a web browser on a PC, Mac or tablet, and the digital mixer interface resembles the analogue PowerMate, with everything visible at a glance. Eight mic/line channels offer phantom power, a high-pass filter, and Vocal Voicing filter, feeding two aux sends and a stereo master bus with a separate Master B output.
Two stereo FX blocks carry the same studio-quality effects as the original PowerMate library, with 100 factory presets and 20 user presets each. For experienced users, a selectable X-tra section adds semi-parametric EQ on all four bands plus a compressor and noise gate on every input. An Automixer helps to improve speech clarity, and a ducker lowers USB playback automatically when any of the selected inputs becomes active.
All settings sit behind a password-protected administrator view. From here, up to two user interfaces with custom mixing access can be set up, each offering only the functions and presets its user needs. For non-technical staff, a Virtual Control Panel with optional PIN protection provides preconfigured controls on a mobile device or wall panel. All labeling can be set in local languages. Three assignable GPIO contacts add simple hardware control of mute, volume, and preset recall, while ready and fault contacts report system status.
Speaker presets optimise loudspeaker performance, while graphic EQs adapt the sound to the room. Together they give the installer a reliable starting point and a short path to a tuned system. Four 12-band graphic EQs serve the master bus, Master B, and both aux sends, and the aux outputs add notch filters for feedback control on monitor lines. All four amplifier channels and the line outputs include delay, trim, FIR-Drive, Dynacord’s LPN processing on option, running the same output DSP chain as the TGX, IPX and IX Series amplifiers. Presets cover the complete Sonicue loudspeaker library, including Electro-Voice and many third-party brands.
Four amplifier channels handle Hi-Z and Lo-Z loads in any combination, so main area, delay lines, and 100V distribution are covered without a second amplifier. Dynacord’s powerTank technology automatically puts the 3kW capacity where it is needed, with up to 1kW on a single channel. During idle periods and background music playback, ecoRail cuts energy consumption by up to 50 per cent and keeps the device cool. A comprehensive protection package and continuous monitoring safeguard the system, even in challenging environments.
Standard connectors accept off-the-shelf cables: XLR/TRS combo inputs, four balanced XLR outputs for master and aux, two balanced quarter-inch TRS outputs for Master B, and twist-lock loudspeaker outputs. The rear panel also features a control port for GPIs and Midi. Two network ports allow direct access from a laptop without a router, or integration into an existing network. Wireless operation runs through an external Wi-Fi access point, which can be powered from a rear USB-C port. A class-compliant USB audio interface handles playback and recording and needs no driver installation, while the USB host port plays WAV or MP3 files from flash drives.
The PowerMate 3000-X is now available globally.
More: www.dynacord.com